.

Vertical-Horizontal Models

Find speed, horsepower, inertia and dimensional information for Dynamatic eddy current dynamometer models here.


Virtually any Dry Gap eddy current dynamometer can be oriented vertically. Please consult with our sales staff for further information.

Line drawing of typical Midwest vertical eddy current dynamometer models

ME Series (5 to 2000 HP)

Line drawing of typical Midwest ME Series eddy current dynamometer
 
Dimensions in inches*    Click on Model # to see its Speed-Torque curve
Model # Design HP Speed Inertia LB-FT2 A B C D E F G H I J
3HS DG 5 3600/18000 .044 12.25 6.0 4.25 8.5 6.0 7 1/8 - 8.0 6.5 13.25
46 DG 10 3000//7000 .14 22 7/8 10.75 9.25 18.5 9 13 27 9.004 12.5 19.5
46HS DG 10 3000/12,000 .14 22 7/8 10.75 9.25 18.5 9 13 27 9.004 12.5 19.5
48HS DG 20 2900/19,000 .204 19 9.5 9.25 18.5 9 13 - 9.004 12.5 19.5
66 DG 30 3000/8000 .8 22 7/8 10.75 9.25 18.5 9 13 27 9.004 12.5 19.5
66HS DG 30 3000/11,000 .8 22.78 10.75 9.25 18.5 9 13 27 9.004 12.5 19.5
758 DG 50 2000/6000 2.6 28 9/16 14.28125 12.25 24.5 9 13 29 10.504 15.75 23.5
758HS DG 50 2000/12,000 2.6 28 9/16 14.28125 12.25 24.5 9 13 29 10.504 15.75 23.5
1014A DG 175 2500/6000 15.7 39 3/8 19 11/16 17 34 22 28 42 15.756 19 7/8 33.5
1014AHS DG 175 2500/10,000 15.7 39 3/8 19 11/16 17 34 22 28 42 15.756 19 7/8 33.5
1014W WIG 250 2500/6000 15.7 39 3/8 19 11/16 17 34 22 28 42 15.756 19 7/8 33.5
1014WHS WIG 250 2500/10,000 15.7 39 3/8 19 11/16 17 34 22 28 42 15.756 19 7/8 33.5
1519A DG 300 1000/5000 111 51 25.5 20.25 40.5 22 28 44.5 21.008 24.75 38.5
1519AHS DG 300 900/6500 111 51 25.5 20.25 40.5 22 28 44.5 21.008 24.75 38.5
1519W WIG 500 1200/5000 111 51 25.5 20.25 40.5 22 28 47 21.008 24.75 38.5
1519WHS WIG 500 1200/6500 111 51 25.5 20.25 40.5 22 28 47 21.008 24.75 38.5
2025A DG 700 1000/3600 677 58.5 29.25 24.25 48.5 27 33 58 21.008 25.75 39.5
2025AHS DG 700 1000/4500 677 58.5 29.25 24.25 48.5 27 33 58 21.008 25.75 39.5
2025W WIG 1200 1000/3600 677 58.5 29.25 24.25 48.5 27 33 58 21.008 25.75 39.5
2025WHS WIG 1200 1000/4500 677 58.5 29.25 24.25 48.5 27 33 58 21.008 25.75 39.5
3232 DG 2000 1000/3000 4640 77.75 38 7/8 31 1/8 62.25 30 38 71.5 31.513 39.25 63

MG Series (250-1500 HP)

Line drawing of typical MG Series Midwest eddy current dynamometer
Dimensions in inches*   Click on Model # to see its Speed-Torque curve
Model # Design HP Speed Inertia LB-FT2 A B C D E F G H I J
6H WIG 250 2000/6000 26 42.5 20.5 17.5 35 22 28 33 15.756 15 5/8 32
512 WIG 500 1750/6000 65.3 50 7/8 24.75 20.5 41 22 28 45 15.756 19.75 38
512HS WIG 500 2000/8000 65.3 50 7/8 24.75 20.5 41 22 28 45 15.756 19.75 38
16M WIG 600 1200/5000 215 59.5 29.5 24.25 48.5 21 28 48 18.000 24 43
25P WIG 1500 1200/4000 646 68.185 33 7/16 28 56 26 33 56 30.0 24 48

*DyneSystems and Midwest-Dynamatic Dynamometers cannot guarantee the accuracy of the data presented on this page. Errors are continually corrected as they are discovered. Please contact us before utilizing this data.


300 Series (300 to 3000 HP)

Line drawing of typical 300 Series Midwest eddy current dynamometer
Dimensions in inches*   Click on Model # to see its Speed-Torque curve
Model # Design HP Speed Inertia LB-FT2 A B C D E F G H I J
310 WIG 300 2500/6000 21 39 3/8 19 11/16 17 34 22 28 42 15.756 19 7/8 33.5
314 WIG 400 1200/5000 75 45 22.5 17 34 27 33 52 15.756 19 7/8 33.5
314HS DG 400 1400/8000 75 52.5 26 1/8 20.5 41 22 33 52 15.756 19 3/4 38
315 WIG 600 1200/5000 110 51 25.5 20.25 40.5 22 28 48 21.008 24.75 38.5
318 WIG 750 1200/5000 110 51 25.5 20.25 40.5 22 28 48 21.008 24.75 38.5
322 WIG 1200 1000/3600 985 58.5 29.25 26 52 27 34 61 30.0 35 56
324 WIG 1500 1200/4000 1450 58.5 29.25 26 52 27 34 61 30.0 35 56
328 WIG 2000 900/3500 3200 58.5 29.25 26 52 27 34 61 30.0 35 56
332 WIG 3000 800/3500 6000 58.5 29.25 26 52 27 34 61 30.0 35 56

*DyneSystems and Midwest-Dynamatic Dynamometers cannot guarantee the accuracy of the data presented on this page. Errors are continually corrected as they are discovered. Please contact us before utilizing this data.


500 Series (300 to 1500 HP)

Line drawing and dimensions of typical 500 Series eddy current dynamometer
Dimensions in inches*   Click on Model # to see its Speed-Torque curve
Model # Design HP Speed Inertia LB-FT2 A B C D E F G H I J
510 WIG 300 2500/6000 26 39 3/8 19 11/16 17 34 22 28 41.5 15.756 19 7/8 33.5
515 WIG 600 1200/5000 183 51 25.5 20.25 40.5 22 28 40.5 21.008 24.75 38.5
515HS WIG 600 1200/6500 183 51 25.5 20.25 40.5 22 28 40.5 21.008 24.75 38.5
518 WIG 1000 1000/5000 460 51 25.5 20.25 40.5 25 31 51.5 21.008 24.75 38.5
521 WIG 1500 1200/4000 940 58.5 29.25 24.25 48.5 21 28 55.5 21.008 24.75 38.5

*DyneSystems and Midwest-Dynamatic Dynamometers cannot guarantee the accuracy of the data presented on this page. Errors are continually corrected as they are discovered. Please contact us before utilizing this data.


900 Series (400 to 4000 HP)

Line drawing and dimensions of typical 900 Series Midwest eddy current dynamometer
Dimensions in inches*   Click on Model # to see its Speed-Torque curve
Model # Design HP Speed Inertia LB-FT2 A B C D E F G H I J
915 WIG 400 1000/5000 55 59.25 29.25 25 50 27 33 60 24 27 54
918 WIG 1000 1400/4000 190 59.25 29.25 25 50 27 33 60 24 27 54
924 WIG 1500 1200/4000 485 58.5 29.25 24.25 48.5 25 31 57 21.008 25.75 39.5
932 WIG 4000 1000/3000 1367 69 34 27 54 28 38 62 24 27 54

*DyneSystems and Midwest-Dynamatic Dynamometers cannot guarantee the accuracy of the data presented on this page. Errors are continually corrected as they are discovered. Please contact us before utilizing this data.