DynPro2

Complete Data Acquisition and Control System

Inter-Loc V Multi-Loop Dynamometer & Throttle Controller

DynPro2 is a state-of-the-art Data Acquisition and Control System for your engine, vehicle and industrial component testing needs. DynPro2 can automate the industrial controls for a room, test cell, even your entire test cell facility, allowing you to integrate room temperature, lights, safety interlocks and much more into your overall testing process. DynPro2 is simple to use but flexible enough for the most rigorous applications.

How DynPro2 can help you:

  • One common platform for all testing applications
  • Quick operation - start testing in just 3 clicks
  • Adaptable to meet your testing requirements
  • Role-based access control
  • Convenient, centralized management of all testing information
  • Create Test Profiles that run automatically by the system
  • Sophisticated graphical and numerical data analysis tools (Data sample rate 100 hz)
  • Professional, customizable reporting and processing
  • Programmable channel alarms and intelligent safety features
  • Closed Loop Control with simple Proportional, Integral and Differential (PID) tuning (Update rate 100 hz)
  • MASC Editor functionality specifies what to measure and how your test equipment should perform
  • Support for engine and vehicle communication protocols (ECM interfacing)
  • Fully configurable, yet easy to use
  • Easy integration with data, system controls and other measurement equipment and services

Support equipment and accessories that complement the DynPro2 system include (but are not limited to):

  • Airflow measurement
  • Analog inputs
  • Blowby measurement
  • Dynamometer control equipment
  • Dynamometer instrumentation
  • Emissions gas measurement
  • Equipment mounting configurations
  • E-stop button kit and alarms
  • Fuel measurement
  • Hose kits
  • Independent speed measurement
  • Pressure kits
  • Temperature inputs
  • Test Cell environment measurement and control
  • Test Cell safety
  • Throttle control
  • Weather station

DynPro2 Packages

DynPro2 Bronze DynPro2 Silver DynPro2 Gold
1 – PC with 1 single monitor 1 – PC with 1 single monitor 1 – PC with 1 single monitor
Sensor Box Sensor Box Sensor Box
2 – Pressure Channels 8 – Pressure Channels with Dual LCD modules for displaying channel names, ranges, etc. 8 – Pressure Channels with Dual LCD modules for displaying channel names, ranges, etc.
Pressure Transducers Pressure Transducers Pressure Transducers
1 – PSIA 0 - 20 (-14.7 to 5.3) 1 – PSIA 0 - 20 (-14.7 to 5.3) 1 – PSIA 0 - 20 (-14.7 to 5.3)
  1 – PSIA 0 - 75 (-14.7 to 60.3) 1 – PSIA 0 - 75 (-14.7 to 60.3)
  4 – PSIA 0 - 150 (-14.7 to 135.3) 4 – PSIA 0 - 150 (-14.7 to 135.3)
1 – PSIA 0 - 200 (-14.7 to 185.3)      1 – PSIA 0 - 200 (-14.7 to 185.3)      1 – PSIA 0 - 200 (-14.7 to 185.3)
  1 – PSIA 0 - 500 (-14.7 to 485.3) 1 – PSIA 0 - 500 (-14.7 to 485.3)
4 – Thermocouple Input Channels 16 – Thermocouple Input Channels 32 – Thermocouple Input Channels
  Dual LCD Modules for displaying channel names, range, etc. Dual LCD Modules for displaying channel names, range, etc.
“Standard Type-K thermocouple connectors” “Standard Type-K thermocouple connectors” “Standard Type-K thermocouple connectors”
1 – Barometric Pressure Sensor 1 – Barometric Pressure Sensor 1 – Barometric Pressure Sensor
1 – Dyno (1 Torque, 1 Frequency) 1 – Dyno (1 Torque, 1 Frequency) 1 – Dyno (1 Torque, 1 Frequency)
    2 – Load Cell
  1 – Speed (Frequency, Encoder, Optical Tach) 2 – Speed (Frequency, Encoder, Optical Tach)
1 – Throttle - Closed Loop Control
(1 DAC 0-10 Vdc/4-20 mA)
1 – Throttle - Closed Loop Control
(1 Digital Output, 1 DAC 0-10 Vdc/4-20 mA)
1 – Throttle - Closed Loop Control
(1 Digital Output, 1 DAC 0-10 Vdc/4-20 mA)
  1 – DAC/Digital Input - Closed Loop Control
(0-10 Vdc/4-20 mA)
2 – DAC/Digital Input - Closed Loop Control
(0-10 Vdc/4-20 mA)
    2 – PWM Output - Closed Loop Control*
1 – Analog Input (0-10 Vdc) 2 – Analog Input (0-10 Vdc) 1 – Analog Input (0-10 Vdc)
    1 – Digital Input/Digital Output
1 – Fuel Measurement 1 – Fuel Measurement 1 – Fuel Measurement
  1 – Blow-By (0-10 Vdc or Frequency) 1 – Blow-By (0-10 Vdc or Frequency)
  1 – Weather Station 1 – Weather Station
  1 – Opacity (0-10 Vdc) 1 – Opacity (0-10 Vdc)
Additional Analog Inputs Additional Analog Inputs Additional Analog Inputs
    Dual LCD Modules for displaying channel names, range, etc.
    8 – Analog Input (0-10 Vdc)
Network/Peripheral Connections Network/Peripheral Connections Network/Peripheral Connections
Wireless Router Wireless Router Wireless Router
  4 Port USB Extender 4 Port USB Extender
1 – ECU 1 – ECU 1 – ECU
1 – Ethernet 1 – Ethernet 1 – Ethernet
  1 – Serial 2 – Serial
1 – RJ-45 Programming 1 – RJ-45 Programming 1 – RJ-45 Programming
  1 – USB 2 – USB
  1 – USB Programming 1 – USB Programming
Channels Listed Below Reside
in the Sensor Box
Dyno Connection Enclosure Dyno Connection Enclosure
Input Channels Input Channels Input Channels
3 – Torque 4 – Torque 4 – Torque
3 – Frequency 4 – Frequency 4 – Frequency
  5 – Voltage Input 5 – Voltage Input
  4 – Type-K Temperature 4 – Type-K Temperature
Controller Outputs Controller Outputs Controller Outputs
3 – DAC - Closed Loop Control
(0-10 Vdc/4-20 mA)
4 – DAC - Closed Loop Control
(0-10 Vdc/4-20 mA)
4 – DAC - Closed Loop Control
(0-10 Vdc/4-20 mA)
4 – PWM Output - Closed Loop Control* 4 – PWM Output - Closed Loop Control* 4 – PWM Output - Closed Loop Control*
Digital I/O Digital I/O Digital I/O
3 – Digital Input 8 – Digital Input 8 – Digital Input
4 – “Low Side Drive” Relays (Max. 8 Amps) 8 – “Low Side Drive” Relays (Max. 8 Amps) 8 – “Low Side Drive” Relays (Max. 8 Amps)
1 – Ignition Relays (Max. 8 Amps) 1 – Ignition Relays (Max. 8 Amps) 1 – Ignition Relays (Max. 8 Amps)
1 – Starter Relays (Max. 8 Amps) 1 – Starter Relays (Max. 8 Amps) 1 – Starter Relays (Max. 8 Amps)
*PWM Output is a RS422 Level Signal (not TTL)